OrangePi AI Pro 固件升级 —— 让主频从 1.0 GHz 到 1.6 GHz 的巨大升级

前言

OrangePi AI Pro 最近发布了Ascend310B-firmware 固件包，据说升级之后可以将 CPU 主频从 1.0 GHz 提升至 1.6 GHz，据群主大大说，算力也从原本的 8T 提升到了 12T，这波开发板的成长让我非常的 Amazing 啊！下面就来演示一下如何升级这个神奇的固件包吧。

固件包下载

该固件包在官网的官方资料页面的官方工具处，点进去我们就能看到网盘链接了。

Ascend310B-firmware 固件包就在网盘列表的最后一项，下载下来。

升级固件

连接上我们的开发板，然后把固件传输到我们的开发板上

然后给该文件添加执行权限，并执行该文件。

chmod +x Ascend310B-firmware-7.3.t3.0.b309-rc-signed-8t-1.6ghz-20240428.run

./Ascend310B-firmware-7.3.t3.0.b309-rc-signed-8t-1.6ghz-20240428.run --full

输入 y 确认开始更新。

固件更新完成！

log 大致如下（凑一下字数，还没到 500 字）(*^_^*)：

(base) root@orangepiaipro:/home/HwHiAiUser/Downloads# ./Ascend310B-firmware-7.3.t3.0.b309-rc-signed-8t-1.6ghz-20240428.run --full
Verifying archive integrity...  100%   SHA256 checksums are OK. All good.
Uncompressing ASCEND310B FIRMWARE RUN PACKAGE  100%  
[Firmware] [2024-06-13 11:20:03] [INFO]Start time: 2024-06-13 11:20:03
[Firmware] [2024-06-13 11:20:03] [INFO]LogFile: /var/log/ascend_seclog/ascend_install.log
[Firmware] [2024-06-13 11:20:03] [INFO]OperationLogFile: /var/log/ascend_seclog/operation.log
[Firmware] [2024-06-13 11:20:03] [INFO]base version is 7.1.T11.0.B226.
[Firmware] [2024-06-13 11:20:03] [WARNING]Do not power off or restart the system during the installation/upgrade
[Firmware] [2024-06-13 11:20:03] [INFO]Firmware package has been installed on the path /usr/local/Ascend, the version is 7.1.T11.0.B226, and the version of this package is 7.3.T3.0.B309,do you want to continue?  [y/n] 
u^Hy^H^H
[Firmware] [2024-06-13 11:20:25] [ERROR]ERR_NO:0x0002;ERR_DES:input error, please input again!
y
[Firmware] [2024-06-13 11:20:31] [INFO]upgradePercentage: 0%
[Firmware] [2024-06-13 11:20:40] [INFO]upgradePercentage: 4%
[Firmware] [2024-06-13 11:20:48] [INFO]upgradePercentage: 36%
[Firmware] [2024-06-13 11:20:57] [INFO]upgradePercentage: 99%
[Firmware] [2024-06-13 11:21:02] [INFO]upgradePercentage: 100%
[Firmware] [2024-06-13 11:21:02] [INFO]Firmware package installed successfully! Reboot now or after driver installation for the installation/upgrade to take effect.
[Firmware] [2024-06-13 1

然后断电重启即可使用新的1.6ghz的固件啦！