tx2 numba opencv

原文：http://www.athenian-robotics.org/jetsontx2/

OpenCV

Instructions for building OpenCV 3.2 on the TX2 are here

https://github.com/jetsonhacks/buildOpenCVTX2

ROS and Gazebo¶

The gazebo7-common library is limited to version 7.0.0+dfsg-2. So install ROS and Gazebo with:

1
      

sudo apt-get install ros-kinetic-desktop-full  gazebo7-common=7.0.0+dfsg-2 

      

PyCuda

To install pycuda, follow the directions 

文章来源: blog.csdn.net，作者：网奇，版权归原作者所有，如需转载，请联系作者。

原文链接：blog.csdn.net/jacke121/article/details/90710445