SpringCloud微服务框架一套就够（下集）

举报
摸鱼打酱油 发表于 2022/04/01 22:28:34 2022/04/01
【摘要】 个人简介作者是一个来自河源的大三在校生，以下笔记都是作者自学之路的一些浅薄经验，如有错误请指正，将来会不断的完善笔记，帮助更多的Java爱好者入门。@[toc] Spring Cloud Netflix 断路器springcloud Hystrix 服务降级在springcloud-02-comsumer-openFeign-dept80的Pom.xml<!-- Hystri...

个人简介

作者是一个来自河源的大三在校生，以下笔记都是作者自学之路的一些浅薄经验，如有错误请指正，将来会不断的完善笔记，帮助更多的Java爱好者入门。
@[toc]

Spring Cloud Netflix

断路器springcloud Hystrix

服务降级

在springcloud-02-comsumer-openFeign-dept80的Pom.xml

<!--        Hystrix-->
          <dependency>
            <groupId>org.springframework.cloud</groupId>
            <artifactId>spring-cloud-starter-netflix-hystrix</artifactId>
        </dependency>

修改它的deptController

@RestController
public class deptController {

    @Autowired
    private deptService deptService;


    @HystrixCommand(fallbackMethod = "queryAllDept_Hystrix",commandProperties = {
            @HystrixProperty(name = "execution.isolation.thread.timeoutInMilliseconds",value = "1500") //添加超时服务降级
    })
    @RequestMapping("/feign/queryAllDept")
    public List<dept> queryAllDept(String id){
        int i = Integer.parseInt(id);
        if(i<0){
            throw new RuntimeException(); //此处为了触发服务降级fallback
        }
        return deptService.queryAllDept();
    }


    //服务降级方法，这个方法直接从上面的正常方法复制过来，把名字修改一下即可，参数类型也和正常的方法要一致
    public List<dept> queryAllDept_Hystrix(String id){

        List<dept> depts = deptService.queryAllDept();
        depts.add(new dept("1000","Hystrix_fallback"));
        return depts;
    }

}

主启动类

@SpringBootApplication
@EnableFeignClients
@EnableHystrix //开启Hystrix功能
public class springApplicationFeign80 {

    public static void main(String[] args) {

        SpringApplication.run(springApplicationFeign80.class,args);

    }
}

commandProperties支持什么参数属性

我们全局搜索HystrixCommandProperties，往下翻可以看到如下

protected HystrixCommandProperties(HystrixCommandKey key, HystrixCommandProperties.Setter builder, String propertyPrefix) {
        this.key = key;
        this.circuitBreakerEnabled = getProperty(propertyPrefix, key, "circuitBreaker.enabled", builder.getCircuitBreakerEnabled(), default_circuitBreakerEnabled);
        this.circuitBreakerRequestVolumeThreshold = getProperty(propertyPrefix, key, "circuitBreaker.requestVolumeThreshold", builder.getCircuitBreakerRequestVolumeThreshold(), default_circuitBreakerRequestVolumeThreshold);
        this.circuitBreakerSleepWindowInMilliseconds = getProperty(propertyPrefix, key, "circuitBreaker.sleepWindowInMilliseconds", builder.getCircuitBreakerSleepWindowInMilliseconds(), default_circuitBreakerSleepWindowInMilliseconds);
        this.circuitBreakerErrorThresholdPercentage = getProperty(propertyPrefix, key, "circuitBreaker.errorThresholdPercentage", builder.getCircuitBreakerErrorThresholdPercentage(), default_circuitBreakerErrorThresholdPercentage);
        this.circuitBreakerForceOpen = getProperty(propertyPrefix, key, "circuitBreaker.forceOpen", builder.getCircuitBreakerForceOpen(), default_circuitBreakerForceOpen);
        this.circuitBreakerForceClosed = getProperty(propertyPrefix, key, "circuitBreaker.forceClosed", builder.getCircuitBreakerForceClosed(), default_circuitBreakerForceClosed);
        this.executionIsolationStrategy = getProperty(propertyPrefix, key, "execution.isolation.strategy", builder.getExecutionIsolationStrategy(), default_executionIsolationStrategy);
        this.executionTimeoutInMilliseconds = getProperty(propertyPrefix, key, "execution.isolation.thread.timeoutInMilliseconds", builder.getExecutionIsolationThreadTimeoutInMilliseconds(), default_executionTimeoutInMilliseconds);
        this.executionTimeoutEnabled = getProperty(propertyPrefix, key, "execution.timeout.enabled", builder.getExecutionTimeoutEnabled(), default_executionTimeoutEnabled);
        this.executionIsolationThreadInterruptOnTimeout = getProperty(propertyPrefix, key, "execution.isolation.thread.interruptOnTimeout", builder.getExecutionIsolationThreadInterruptOnTimeout(), default_executionIsolationThreadInterruptOnTimeout);
        this.executionIsolationThreadInterruptOnFutureCancel = getProperty(propertyPrefix, key, "execution.isolation.thread.interruptOnFutureCancel", builder.getExecutionIsolationThreadInterruptOnFutureCancel(), default_executionIsolationThreadInterruptOnFutureCancel);
        this.executionIsolationSemaphoreMaxConcurrentRequests = getProperty(propertyPrefix, key, "execution.isolation.semaphore.maxConcurrentRequests", builder.getExecutionIsolationSemaphoreMaxConcurrentRequests(), default_executionIsolationSemaphoreMaxConcurrentRequests);
        this.fallbackIsolationSemaphoreMaxConcurrentRequests = getProperty(propertyPrefix, key, "fallback.isolation.semaphore.maxConcurrentRequests", builder.getFallbackIsolationSemaphoreMaxConcurrentRequests(), default_fallbackIsolationSemaphoreMaxConcurrentRequests);
        this.fallbackEnabled = getProperty(propertyPrefix, key, "fallback.enabled", builder.getFallbackEnabled(), default_fallbackEnabled);
        this.metricsRollingStatisticalWindowInMilliseconds = getProperty(propertyPrefix, key, "metrics.rollingStats.timeInMilliseconds", builder.getMetricsRollingStatisticalWindowInMilliseconds(), default_metricsRollingStatisticalWindow);
        this.metricsRollingStatisticalWindowBuckets = getProperty(propertyPrefix, key, "metrics.rollingStats.numBuckets", builder.getMetricsRollingStatisticalWindowBuckets(), default_metricsRollingStatisticalWindowBuckets);
        this.metricsRollingPercentileEnabled = getProperty(propertyPrefix, key, "metrics.rollingPercentile.enabled", builder.getMetricsRollingPercentileEnabled(), default_metricsRollingPercentileEnabled);
        this.metricsRollingPercentileWindowInMilliseconds = getProperty(propertyPrefix, key, "metrics.rollingPercentile.timeInMilliseconds", builder.getMetricsRollingPercentileWindowInMilliseconds(), default_metricsRollingPercentileWindow);
        this.metricsRollingPercentileWindowBuckets = getProperty(propertyPrefix, key, "metrics.rollingPercentile.numBuckets", builder.getMetricsRollingPercentileWindowBuckets(), default_metricsRollingPercentileWindowBuckets);
        this.metricsRollingPercentileBucketSize = getProperty(propertyPrefix, key, "metrics.rollingPercentile.bucketSize", builder.getMetricsRollingPercentileBucketSize(), default_metricsRollingPercentileBucketSize);
        this.metricsHealthSnapshotIntervalInMilliseconds = getProperty(propertyPrefix, key, "metrics.healthSnapshot.intervalInMilliseconds", builder.getMetricsHealthSnapshotIntervalInMilliseconds(), default_metricsHealthSnapshotIntervalInMilliseconds);
        this.requestCacheEnabled = getProperty(propertyPrefix, key, "requestCache.enabled", builder.getRequestCacheEnabled(), default_requestCacheEnabled);
        this.requestLogEnabled = getProperty(propertyPrefix, key, "requestLog.enabled", builder.getRequestLogEnabled(), default_requestLogEnabled);
        this.executionIsolationThreadPoolKeyOverride = HystrixPropertiesChainedProperty.forString().add(propertyPrefix + ".command." + key.name() + ".threadPoolKeyOverride", (Object)null).build();
    }

例如：超时降级execution.isolation.thread.timeoutInMilliseconds和服务熔断的circuitBreaker.enabled和circuitBreaker.requestVolumeThreshold等等都在上面可以找到

全局服务降级

实现全局服务降级主要就是靠@DefaultProperties和@HystrixCommand

进入@DefaultProperties

@Target({ElementType.TYPE})
@Retention(RetentionPolicy.RUNTIME)
@Inherited
@Documented
public @interface DefaultProperties {
    String groupKey() default "";

    String threadPoolKey() default "";

    HystrixProperty[] commandProperties() default {};

    HystrixProperty[] threadPoolProperties() default {};

    Class<? extends Throwable>[] ignoreExceptions() default {};

    HystrixException[] raiseHystrixExceptions() default {};

    String defaultFallback() default "";
}

使用方法：这个注解加到消费者的controller层上，必要配置（defaultFallback）也就是默认服务降级方法名称，然后在需要使用默认服务降级的方法上加上@HystrixCommand（不加任何参数）即可

小坑：注意=======>默认服务降级的方法也就是defaultFallback方法“”不能有任何参数“”，不然就会报错

比如如下配置

@RestController
@DefaultProperties(defaultFallback = "queryAllDept_Hystrix") //默认全局服务降级，也就是配置上去后，需要服务降级的方法加上@HystrixCommand不加参数即可
public class deptController {

    @Autowired
    private deptService deptService;


//    @HystrixCommand(fallbackMethod = "queryAllDept_Hystrix",commandProperties = {
//            @HystrixProperty(name = "execution.isolation.thread.timeoutInMilliseconds",value = "1500")
//    })

    @HystrixCommand //触发全局服务降级
    @RequestMapping("/feign/queryAllDept")
    public List<dept> queryAllDept(String id){
        int i = Integer.parseInt(id);
        if(i<0){
            throw new RuntimeException();
        }
        return deptService.queryAllDept(id);
    }


//    //服务降级方法,全局服务降级方法不能有参数
    public List<dept> queryAllDept_Hystrix(){

        List<dept> depts = new ArrayList<>();
        depts.add(new dept("1000","Hystrix_fallback"));
        return depts;
    }

}

服务熔断

Pom.xml

 <!--        Hystrix-->
        <dependency>
            <groupId>org.springframework.cloud</groupId>
            <artifactId>spring-cloud-starter-netflix-hystrix</artifactId>
        </dependency>

在springcloud-02-provider-dept8001和8002的controller

@RestController
public class deptController {

    private deptService deptService;

    @Value("${server.port}")
    private String port;


    @Autowired
    @Qualifier("deptServiceImpl")
    public void setDeptService(com.boot.service.deptService deptService) {
        this.deptService = deptService;
    }
    @GetMapping(path = "/queryAllDept")
    @HystrixCommand(fallbackMethod = "queryAllDept_Hystrix",commandProperties = {
            @HystrixProperty(name = "circuitBreaker.enabled",value = "true"),
            @HystrixProperty(name = "circuitBreaker.requestVolumeThreshold",value = "10"),
            @HystrixProperty(name = "circuitBreaker.sleepWindowInMilliseconds",value = "20000"),//注意这是毫秒。1秒=1000毫秒
            @HystrixProperty(name = "circuitBreaker.errorThresholdPercentage",value = "50")

    })
    public List<dept> queryAllDept(String id){
        List<dept> depts = deptService.queryAllDept();
        depts.add(new dept("999",port));
//        try {
//            Thread.sleep(1500);
//        } catch (InterruptedException e) {
//            e.printStackTrace();
//        }

        if(Integer.parseInt(id)<0){
            throw new RuntimeException();
        }

        return depts;
    }

    /**
     * 服务熔断
     */
    public List<dept> queryAllDept_Hystrix(String id){

        List<dept> depts = deptService.queryAllDept();
        depts.add(new dept("1066","Break"));
        return depts;
    }

}

提供者主启动类：

@SpringBootApplication
@EnableEurekaClient //eureka客户端
@EnableCircuitBreaker //开启服务熔断功能
public class SpringBootApplication8001 {

    public static void main(String[] args) {
        SpringApplication.run(SpringBootApplication8001.class,args);


    }

}

Hystrix-Dashboard

创建子模块springcloud-02-hystrix-Dashboard8110

仪表盘的访问页面：

假如端口号是8110：http://localhost:8110/hystrix

Pom.xml

 <dependencies>

        <!--      web和actuator是必备的，******除了gateway网关不能加入web包  -->
        <dependency>
            <groupId>org.springframework.boot</groupId>
            <artifactId>spring-boot-starter-web</artifactId>
        </dependency>

        <!--        actuator用来监控-->
        <dependency>
            <groupId>org.springframework.boot</groupId>
            <artifactId>spring-boot-starter-actuator</artifactId>
        </dependency>

<!--     Hystrix-dashboard-->
         <dependency>
            <groupId>org.springframework.cloud</groupId>
            <artifactId>spring-cloud-starter-netflix-hystrix-dashboard</artifactId>
        </dependency>
 
    </dependencies>

配置文件没有要求，就修改端口号即可

server:
  port: 8110
spring:
  application:
    name: hystrixDashboard8110

主启动类：

@SpringBootApplication
@EnableHystrixDashboard //开启了Hystrix仪表盘功能
public class springBootApplication8110 {

    public static void main(String[] args) {
        SpringApplication.run(springBootApplication8110.class,args);
    }



}
Bug：Hystrix仪表盘连接不上

image-20210227124135194

解决方法：在每一个需要监控的模块（比如微服务提供者8001和8002）加上如下配置

1.微服务提供者的Pom.xml

<!--     Hystrix-dashboard（微服务提供者）-->
         <dependency>
            <groupId>org.springframework.cloud</groupId>
            <artifactId>spring-cloud-starter-netflix-hystrix-dashboard</artifactId>
        </dependency>

2.在微服务提供者8001和8002加上一个bean

@SpringBootApplication
@EnableEurekaClient //eureka客户端
@EnableCircuitBreaker //开启服务熔断功能
public class SpringBootApplication8001 {

    public static void main(String[] args) {
        SpringApplication.run(SpringBootApplication8001.class,args);


    }
    //解决Hystrix-dashboard连接不上
    @Bean
    public ServletRegistrationBean getServlet() {
        HystrixMetricsStreamServlet streamServlet = new HystrixMetricsStreamServlet();
        ServletRegistrationBean registrationBean = new ServletRegistrationBean(streamServlet);
        registrationBean.setLoadOnStartup(1);
        registrationBean.addUrlMappings("/hystrix.stream");
        registrationBean.setName("HystrixMetricsStreamServlet");
        return registrationBean;
    }
}
Bug：Hystrix仪表盘一直是loading

解决方法：用openFeign去调用一下即可

成功页面👇

image-20210227170129598

服务网关springcloud gateway

小坑：1.注意===》gateWay不能有springBoot-Web的启动器，不然会报错。。。。。。。。

小坑（负载均衡）：2.注意==》需要把gateway当作提供者注册到注册中心eureka中，不然不能进行服务网关的负载均衡

服务网关gateway作用：把所有请求都先进入网关gateway，再由gateway进行分发请求，这样的好处就是隐藏分发到的微服务的端口号，安全性更高

配置gateway服务网关

1.创建子模块springcloud-02-gateWay9527

2.打开pom.xml，添加依赖

 		<dependency>
            <groupId>org.springframework.cloud</groupId>
            <artifactId>spring-cloud-starter-gateway</artifactId>
        </dependency>

3.application.yml

server:
  port: 9527

spring:
  cloud:
    gateway:
      routes: #配置路由
        - id: providerGateway8001
          uri: http://localhost:8001
          predicates: #配置断言
            - Path=/queryAllDept

4.然后再访问http://localhost:9527/queryAllDept?id=1

gateway服务网关负载均衡（lb）

注意：需要把gateway当作提供者“”注册“”到注册中心eureka中，不然不能进行服务网关的负载均衡**

1.先导入这个

		<!--        eureka Client-->
        <dependency>
            <groupId>org.springframework.cloud</groupId>
            <artifactId>spring-cloud-starter-netflix-eureka-client</artifactId>
        </dependency>

2.springBootApplication

@SpringBootApplication
@EnableEurekaClient
public class springBootApplication9527 {

    public static void main(String[] args) {

        SpringApplication.run(springBootApplication9527.class,args);

    }

}

3.application.yml

server:
  port: 9527

spring:
  application:
    name: gateway9527
  cloud:
    gateway:
      routes:
        - id: providerGateway8001
          uri: lb://PROVIDER-DEPT
          predicates:
            - Path=/queryAllDept

eureka:
  client:
    fetch-registry: true
    register-with-eureka: true
    service-url:
      defaultZone: http://eureka-server7001.com:7001/eureka/, http://eureka-server7002.com:7002/eureka/, http://eureka-server7003.com:7003/eureka/

分布式配置中心springcloud config

1.创建gitee或者GitHub，并把配置文件上传到git

image-20210302204336025

我们目的是拉取上面红框的配置文件

分布式配置中心服务器端（server）

2.创建子模块springcloud-02-config-server9001

3.导入依赖

<!--        config-server-->
      <dependency>
            <groupId>org.springframework.cloud</groupId>
            <artifactId>spring-cloud-config-server</artifactId>
        </dependency>

4.application.yml

server:
  port: 9001
spring:
  cloud:
    config:
      server:
        git:
          default-label: master #文件所在git的分支，默认是master
          uri: https://gitee.com/youzhengjie/could-config #这个uri就是文件所在的网页地址。。。。

5.启动类

@SpringBootApplication
@EnableConfigServer //开启分布式配置中心服务器端
public class springBootApplication9001 {

    public static void main(String[] args) {

        SpringApplication.run(springBootApplication9001.class,args);

    }

}

分布式配置中心客户端（client）

1.创建子模块springcloud-02-config-client8002

2.导入依赖（注意：web和config-client必须要导入，特别是web依赖，不导入不行）

		 <dependency>
            <groupId>org.springframework.boot</groupId>
            <artifactId>spring-boot-starter-web</artifactId>
        </dependency>

        <dependency>
            <groupId>org.springframework.boot</groupId>
            <artifactId>spring-boot-starter-actuator</artifactId>
        </dependency>

        <dependency>
            <groupId>org.springframework.cloud</groupId>
            <artifactId>spring-cloud-config-client</artifactId>
        </dependency>

3.主启动类====不用加什么，就一个普通的springBoot启动类即可

4.bootstrap.yml

server:
  port: 8200

spring:
  cloud:
    config:
      label: master
      name: application
      uri: http://localhost:9001

5.controller(去测试有没有sys.version，有的话就说明成功了）

@RestController
public class testController {

    @Value("${sys.version}")
    private String version;

    @RequestMapping("/getVersion")
    public String getVersion(){

        return version;
    }
}

image-20210303204534651

引入springcloud bus消息总线之前。。。。

我们用git去把sys.version更新成1.8

去访问一下config-server

image-20210303204818402

发现config-server是可以立刻更新到的，因为config-server和gitee是直连的。

我们去访问一下config-client

image-20210303204946992

发现还是1.7，只有重新启动config-client项目才能更新成1.8，这是我们要用到actuator的refresh端点，手动刷新。

actuator手动刷新config-client

修改如下：1.在controller加上@RefreshScope

@RestController
@RefreshScope //config client刷新注解
public class testController {

    @Value("${sys.version}")
    private String version;

    @RequestMapping("/getVersion")
    public String getVersion(){

        return version;
    }



}

2.暴露端点

server:
  port: 8200

spring:
  cloud:
    config:
      label: master
      name: application
      uri: http://localhost:9001

#开启所有端点
management:
  endpoints:
    web:
      exposure:
        include: "*"

3.用postman去发送post刷新请求

前提：1.发送POST请求到uri/actuator/refresh

2.前面几步工作做好，比如@RefreshScope。

image-20210303210634591

就ok了！！！

为什么要引入springcloud bus的原因

感想：假如有20个config-client，我们要去刷新他们，难道一个个去发送post请求/actuator/refresh???那肯定不行，这样可以是可以，但是效率太低了，所以我们就会引入消息总线springcloud bus，一次post刷新请求即可，不管有多少模块需要刷新。很方便

消息总线springcloud Bus

引入消息总线springcloud bus不需要创建新的模块。。。。只需要用config server和config client即可

为什么不需要创建新的模块呢？因为在下面的架构中可以说明一切

1202638-20180521203126866-1299643942

安装rabbitMQ环境

总教程：https://www.cnblogs.com/saryli/p/9729591.html

1.安装erlang

（1.）下载erlang

官网地址：https://www.erlang.org/

下载教程：https://www.cnblogs.com/minily/p/7398445.html

（2.）配置erlang环境

配置教程：https://blog.csdn.net/g6256613/article/details/80191402

需要配置环境变量

image-20210304210138086

image-20210304210211142

（3.）检查是否安装成功

打开cmd，输入erl，有输出说明成功

（4.）下载rabbitMQ

下载地址：https://www.cnblogs.com/saryli/p/9729591.html

。。。。。。。。。。。。省略，在总教程都有。

（5.）最后访问http://localhost:15672，如果访问成功，说明rabbitMQ安装成功

配置springcloud Bus

有了springcloud bus，我们只需要通知config server，config server就会去“”遍历“”config client，一个个发送刷新的通知，就比如一个个发送/actuator/refresh

1.在上面的基础上，config server9001的pom.xml添加依赖

		<!--        bus-->
        <dependency>
            <groupId>org.springframework.cloud</groupId>
            <artifactId>spring-cloud-starter-bus-amqp</artifactId>
        </dependency>

注意===========》2.config server 9001的application.yml

spring:
  cloud:
    config:
      server:
        git:
          default-label: master
          uri: https://gitee.com/youzhengjie/could-config
  rabbitmq:
    port: 5672
    username: guest
    password: guest
    host: localhost

#########注意：：：：一定要开放bus-refresh端点
management:
  endpoints:
    web:
      exposure:
        include: "bus-refresh"

3.在上面的基础上，config client 8200 的pom.xml

		<!--        bus-->
        <dependency>
            <groupId>org.springframework.cloud</groupId>
            <artifactId>spring-cloud-starter-bus-amqp</artifactId>
        </dependency>

4.config client 8200的application.yml

spring:
  cloud:
    config:
      label: master
      name: application
      uri: http://localhost:9001
  rabbitmq:
    host: localhost
    username: guest
    password: guest
    port: 5672

5.在postman发送刷新命令即可。http://localhost:9001/actuator/bus-refresh

image-20210304204839588

【版权声明】本文为华为云社区用户原创内容，转载时必须标注文章的来源（华为云社区）、文章链接、文章作者等基本信息， 否则作者和本社区有权追究责任。如果您发现本社区中有涉嫌抄袭的内容，欢迎发送邮件进行举报，并提供相关证据，一经查实，本社区将立刻删除涉嫌侵权内容，举报邮箱： cloudbbs@huaweicloud.com
Spring Cloud 微服务
  • 点赞
  • 收藏
  • 关注作者

评论（0）

0/1000
抱歉，系统识别当前为高风险访问，暂不支持该操作

全部回复

上滑加载中

设置昵称

在此一键设置昵称，即可参与社区互动！

*长度不超过10个汉字或20个英文字符，设置后3个月内不可修改。

*长度不超过10个汉字或20个英文字符，设置后3个月内不可修改。

确认 取消

加入云驻计划，成为创作者

  • 华为云周边好礼
  • 免费体验产品
  • 特殊身份标识
  • 线下官方门票
  • 内部专家零距离
  • 与10000+优质创作者共同成长
立即加入