Laravel技巧:使用load、with预加载 区别

举报
lxw1844912514 发表于 2022/03/27 02:39:37 2022/03/27
【摘要】 1、使用load $posts = Post::all(); $posts->load( 'user'); 2、使用with $posts = Post::with('user')->all...

1、使用load

  1. $posts = Post::all();
  2. $posts->load( 'user');

2、使用with

$posts = Post::with('user')->all();
  

懒加载是什么意思呢?

两张表,目录表和教材表。多个教材属于一个目录,那么利用懒加载,你就可以通过先把目录读出来,然后把这些与目录有关的教材一下子读出来完。这样进行数据库读取的次数就少了。

所以我从国外的一个网站上搬来了with和load的用法,大家自行领悟吧。

Both accomplish the same end results—eager loading a related model onto the first. In fact, they both run exactly the same two queries. The key difference is that with() eager loads the related model up front, immediately after the initial query (all(), first(), or find(x), for example); when using load(), you run the initial query first, and then eager load the relation at some later point.

“Eager” here means that we’re associating all the related models for a particular result set using just one query, as opposed to having to run n queries, where n is the number of items in the initial set.

Eager loading using with()

If we eager load using with(), for example:

$users = User::with('comments')->get(); 
    

if we have 5 users, the following two queries get run immediately:

select * from `users` select * from `comments` where `comments`.`user_id` in (1, 2, 3, 4, 5) 
    

…and we end up with a collection of models that have the comments attached to the user model, so we can do something like $users->comments->first()->body.

“Lazy” eager loading using load()

In this approach, we can separate the two queries, first by getting the initial result:

$users = User::all(); 
    

which runs:

select * from `users` 
    

And later, if we decide(based on some condition) that we need the related comments for all these users, we can eager load them after the fact:

if($someCondition){  $users = $users->load('comments'); } 
    

which runs the 2nd query:

select * from `comments` where `comments`.`user_id` in (1, 2, 3, 4, 5) 
    

And we end up with the same result, just split into two steps. Again, we can call $users->comments->first()->body to get to the related model for any item.

Conclusion

When to use load() or with()?

load() gives you the option of deciding later, based on some dynamic condition, whether or not you need to run the 2nd query.

If, however, there’s no question that you’ll need to access all the related items, use with().

 

先说说 关联查询:我们在 Model 类里定义的关联,我们不一定在第一次查询就全部查出来,我们可以在需要的时候再去查询 ,使用 load 方法,可以实现这个目标,但是这个 load 只是针对单个 model 对象的,如果我们 Model::xxx()->xx() 链式操作最后是 get(),我们得到的结果将会是一个 Collection 实例,最后调用的方法是 first() 或其他类似的 firstOrFail() 的时候,返回的才是一个 Model 实例。也就是说 load 方法只针对 Model 实例。如下:总结:with 一步等于执行了两步,load 分开执行两步参考:https://www.cnblogs.com/cjjjj/p/9839725.html
  

文章来源: blog.csdn.net,作者:lxw1844912514,版权归原作者所有,如需转载,请联系作者。

原文链接:blog.csdn.net/lxw1844912514/article/details/100029303

【版权声明】本文为华为云社区用户转载文章,如果您发现本社区中有涉嫌抄袭的内容,欢迎发送邮件进行举报,并提供相关证据,一经查实,本社区将立刻删除涉嫌侵权内容,举报邮箱: cloudbbs@huaweicloud.com
  • 点赞
  • 收藏
  • 关注作者

评论(0

0/1000
抱歉,系统识别当前为高风险访问,暂不支持该操作

全部回复

上滑加载中

设置昵称

在此一键设置昵称,即可参与社区互动!

*长度不超过10个汉字或20个英文字符,设置后3个月内不可修改。

*长度不超过10个汉字或20个英文字符,设置后3个月内不可修改。