Android 8.1 关机充电动画（二）Uboot模式

system：Android 8.1
platform：RK3326/PX30
uboot
kernel

Android 8.1 关机充电动画（一）模式选择
Android 8.1 关机充电动画（二）Uboot模式
Android 8.1 关机充电动画（三）Android模式

前言

这部分要涉及到uboot下关机充电动画的定制，属于比较low level的部分，所以代码修改的部分不大，在uboot中主要是对多张图片进行轮播，所以这里的主要工作是定位到相应的代码以及如何定制自己的动画。

相关文档

RK在uboot的开发方面已经给出了文档，
其中已经包括了这部分动画如何打包到rom中，不可避免的是需要重新编译uboot，但是图片会被打包到resource.img中。

相关代码

重新回到代码中u-boot/drivers/power/charge_animation.c

struct charge_image {
	const char *name;
	int soc;
	int period;	/* ms */
};
/*
 * IF you want to use your own charge images, please:
 *
 * 1. Update the following 'image[]' to point to your own images;
 * 2. You must set the failed image as last one and soc = -1 !!!
 */
static const struct charge_image image[] = {
	{ .name = "battery_0.bmp", .soc = 5, .period = 600 },
	{ .name = "battery_1.bmp", .soc = 20, .period = 600 },
	{ .name = "battery_2.bmp", .soc = 40, .period = 600 },
	{ .name = "battery_3.bmp", .soc = 60, .period = 600 },
	{ .name = "battery_4.bmp", .soc = 80, .period = 600 },
	{ .name = "battery_5.bmp", .soc = 100, .period = 600 },
	{ .name = "battery_fail.bmp", .soc = -1, .period = 1000 },
};

  

 

  
1
  
2
  
3
  
4
  
5
  
6
  
7
  
8
  
9
  
10
  
11
  
12
  
13
  
14
  
15
  
16
  
17
  
18
  
19
  
20
 

• name ：文件名
• soc：图片对应的电量百分比
• period：图片显示的时间（单位：ms）

那么，这里问题来了，图片如何打包到固件里呢？

1. 先找到RK提供的打包用的脚本，u-boot/pack_resource.sh
2. 找到需要打包的图片，然后需要修改的直接替换掉，图片采用8bit或24bit bmp格式，图片路径：u-boot/tools/images/，如下图所示：
3. 最终就是如何打包图片了：

cd u-boot && ./pack_resource.sh ../kernel/resource.img

  

 

  
1
 

执行完以上命令后，终端会输出以下信息，说明打包成功；

Pack ./tools/images/ & resource.img to resource.img ...
Unpacking old image(resource.img):
rk-kernel.dtb battery_1.bmp battery_2.bmp battery_3.bmp battery_4.bmp battery_5.bmp battery_fail.bmp logo.bmp logo_kernel.bmp battery_0.bmp
Pack to resource.img successed!
Packed resources:
rk-kernel.dtb battery_1.bmp battery_2.bmp battery_3.bmp battery_4.bmp battery_5.bmp battery_fail.bmp logo.bmp logo_kernel.bmp battery_0.bmp
resource.img is packed ready

  

 

  
1
  
2
  
3
  
4
  
5
  
6
  
7
 

并且会在当前的路径下重新生成resource.img，将这个文件重新烧写到设备的对应分区，就可以把充电动画打包到设备的rom中了。

总结

简单介绍了RK平台上进行关机充电uboot模式下充电动画的定制和打包方法，篇幅较短，也可以参考RK官方的文档，下一篇介绍一下，关机充电Android模式下如何进行充电动画的修改。附录是充电动画显示的主要代码。

附录

下面的代码是函数static int charge_animation_show(struct udevice *dev)中的while(1)，这里会一直循环显示充电图片；

	/* Charging ! */
	while (1) {
		/*
		 * At the most time, fuel gauge is usually a i2c device, we
		 * should avoid read/write all the time. We had better set
		 * poll seconds to update fuel gauge info.
		 */
		if (!first_poll_fg && get_timer(delta) < FUEL_GAUGE_POLL_MS)
			goto show_images;

		delta = get_timer(0);

		debug("step1 (%d)... \n", screen_on);

		/*
		 * Most fuel gauge is I2C interface, it shouldn't be interrupted
		 * during tansfer. The power key event depends on interrupt, so
		 * so we should disable local irq when update fuel gauge.
		 */
		local_irq_disable();

		/* Step1: Is charging now ? */
		charging = fuel_gauge_get_chrg_online(fg);
		if (charging <= 0) {
			printf("Not charging, online=%d. Shutdown...\n",
			       charging);

			/* wait uart flush before shutdown */
			mdelay(5);

			/* PMIC shutdown */
			pmic_shutdown(pmic);

			printf("Cpu should never reach here, shutdown failed !\n");
			continue;
		}

		debug("step2 (%d)... show_idx=%d\n", screen_on, show_idx);

		/* Step2: get soc and voltage */
		soc = fuel_gauge_get_soc(fg);
		if (soc < 0 || soc > 100) {
			printf("get soc failed: %d\n", soc);
			continue;
		}

		voltage = fuel_gauge_get_voltage(fg);
		if (voltage < 0) {
			printf("get voltage failed: %d\n", voltage);
			continue;
		}

		current = fuel_gauge_get_current(fg);
		if (current == -ENOSYS) {
			printf("get current failed: %d\n", current);
			continue;
		}
		first_poll_fg = 0;

		local_irq_enable();

show_images:
		/*
		 * Just for debug, otherwise there will be nothing output which
		 * is not good to know what happen.
		 */
		if (!debug_start)
			debug_start = get_timer(0);
		if (get_timer(debug_start) > 20000) {
			debug_start = get_timer(0);
			printf("[%8ld]: soc=%d%%, vol=%dmv, c=%dma, online=%d, screen_on=%d\n",
			       get_timer(0)/1000, soc, voltage,
			       current, charging, screen_on);
		}

		/*
		 * If ever lowpower screen off, force screen_on=false, which
		 * means key event can't modify screen_on, only voltage higher
		 * then threshold can update screen_on=true;
		 */
		if (ever_lowpower_screen_off)
			screen_on = false;

		/*
		 * Auto turn on screen when voltage higher than Vol screen on.
		 * 'ever_lowpower_screen_off' means enter while loop with
		 * screen off.
		 */
		if ((ever_lowpower_screen_off) &&
		    (voltage > pdata->screen_on_voltage)) {
			ever_lowpower_screen_off = false;
			screen_on = true;
			show_idx = IMAGE_SHOW_RESET;
		}

		/*
		 * IMAGE_SHOW_RESET means show_idx show be update by start_idx.
		 * When short key pressed event trigged, we will set show_idx
		 * as IMAGE_SHOW_RESET which updates images index from start_idx
		 * that calculate by current soc.
		 */
		if (show_idx == IMAGE_SHOW_RESET) {
			for (i = 0; i < image_num - 2; i++) {
				/* Find out which image we start to show */
				if ((soc >= image[i].soc) &&
				    (soc < image[i + 1].soc)) {
					start_idx = i;
					break;
				}

				if (soc >= 100) {
					start_idx = image_num - 2;
					break;
				}
			}

			debug("%s: show_idx=%d, screen_on=%d\n",
			      __func__, show_idx, screen_on);

			/* Mark start index and start time */
			show_idx = start_idx;
			show_start = get_timer(0);
		}

		debug("step3 (%d)... show_idx=%d\n", screen_on, show_idx);

		/* Step3: show images */
		if (screen_on) {
			/* Don't call 'charge_show_bmp' unless image changed */
			if (old_show_idx != show_idx) {
				old_show_idx = show_idx;
				debug("SHOW: %s\n", image[show_idx].name);
				charge_show_bmp(image[show_idx].name);
			}
			/* Re calculate timeout to off screen */
			if (priv->auto_screen_off_timeout == 0)
				priv->auto_screen_off_timeout = get_timer(0);
		} else {
			priv->auto_screen_off_timeout = 0;

			system_suspend_enter(pdata);
		}

		mdelay(5);

		/* Every image shows period */
		if (get_timer(show_start) > image[show_idx].period) {
			show_start = get_timer(0);
			/* Update to next image */
			show_idx++;
			if (show_idx > (image_num - 2))
				show_idx = IMAGE_SHOW_RESET;
		}

		debug("step4 (%d)... \n", screen_on);

		/*
		 * Step4: check key event.
		 *
		 * Short key event: turn on/off screen;
		 * Long key event: show logo and boot system or still charging.
		 */
		key_state = check_key_press(dev);
		if (key_state == KEY_PRESS_DOWN) {
			old_show_idx = IMAGE_SHOW_RESET;

			/* NULL means show nothing, ie. turn off screen */
			if (screen_on)
				charge_show_bmp(NULL);

			/*
			 * Clear current image index, and show image
			 * from start_idx
			 */
			show_idx = IMAGE_SHOW_RESET;

			/*
			 * We turn off screen by charge_show_bmp(NULL), so we
			 * should tell while loop to stop show images any more.
			 *
			 * If screen_on=false, means this short key pressed
			 * event turn on the screen and we need show images.
			 *
			 * If screen_on=true, means this short key pressed
			 * event turn off the screen and we never show images.
			 */
			if (screen_on)
				screen_on = false;
			else
				screen_on = true;
		} else if (key_state == KEY_PRESS_LONG_DOWN) {
			/* Only long pressed while screen off needs screen_on true */
			if (!screen_on)
				screen_on = true;

			/* Is able to boot now ? */
			if (soc < pdata->exit_charge_level) {
				printf("soc=%d%%, threshold soc=%d%%\n",
				       soc, pdata->exit_charge_level);
				printf("Low power, unable to boot, charging...\n");
				show_idx = image_num - 1;
				continue;
			}

			if (voltage < pdata->exit_charge_voltage) {
				printf("voltage=%dmv, threshold voltage=%dmv\n",
				       voltage, pdata->exit_charge_voltage);
				printf("Low power, unable to boot, charging...\n");
				show_idx = image_num - 1;
				continue;
			}

			/* Success exit charging */
			printf("Exit charge animation...\n");
			charge_show_logo();
			break;
		} else {
			/* Do nothing */
		}

		debug("step5 (%d)... \n", screen_on);

		/* Step5: Exit by ctrl+c */
		if (ctrlc()) {
			if (voltage >= pdata->screen_on_voltage)
				charge_show_logo();
			printf("Exit charge, due to ctrl+c\n");
			break;
		}
	}

  

 

  
1
  
2
  
3
  
4
  
5
  
6
  
7
  
8
  
9
  
10
  
11
  
12
  
13
  
14
  
15
  
16
  
17
  
18
  
19
  
20
  
21
  
22
  
23
  
24
  
25
  
26
  
27
  
28
  
29
  
30
  
31
  
32
  
33
  
34
  
35
  
36
  
37
  
38
  
39
  
40
  
41
  
42
  
43
  
44
  
45
  
46
  
47
  
48
  
49
  
50
  
51
  
52
  
53
  
54
  
55
  
56
  
57
  
58
  
59
  
60
  
61
  
62
  
63
  
64
  
65
  
66
  
67
  
68
  
69
  
70
  
71
  
72
  
73
  
74
  
75
  
76
  
77
  
78
  
79
  
80
  
81
  
82
  
83
  
84
  
85
  
86
  
87
  
88
  
89
  
90
  
91
  
92
  
93
  
94
  
95
  
96
  
97
  
98
  
99
  
100
  
101
  
102
  
103
  
104
  
105
  
106
  
107
  
108
  
109
  
110
  
111
  
112
  
113
  
114
  
115
  
116
  
117
  
118
  
119
  
120
  
121
  
122
  
123
  
124
  
125
  
126
  
127
  
128
  
129
  
130
  
131
  
132
  
133
  
134
  
135
  
136
  
137
  
138
  
139
  
140
  
141
  
142
  
143
  
144
  
145
  
146
  
147
  
148
  
149
  
150
  
151
  
152
  
153
  
154
  
155
  
156
  
157
  
158
  
159
  
160
  
161
  
162
  
163
  
164
  
165
  
166
  
167
  
168
  
169
  
170
  
171
  
172
  
173
  
174
  
175
  
176
  
177
  
178
  
179
  
180
  
181
  
182
  
183
  
184
  
185
  
186
  
187
  
188
  
189
  
190
  
191
  
192
  
193
  
194
  
195
  
196
  
197
  
198
  
199
  
200
  
201
  
202
  
203
  
204
  
205
  
206
  
207
  
208
  
209
  
210
  
211
  
212
  
213
  
214
  
215
  
216
  
217
  
218
  
219
  
220
  
221
  
222
  
223
  
224
  
225
  
226
  
227
  
228
  
229
  
230
 

文章来源: great.blog.csdn.net，作者：小麦大叔，版权归原作者所有，如需转载，请联系作者。

原文链接：great.blog.csdn.net/article/details/89192487