目录

DHCP

DHCP(Dynamic Host Configuration Protocol，动态主机配置协议)是一个局域网的网络协议(计算机网络应用层协议 )，使用UDP协议工作。
主要有两个用途：给内部网络或ISP(网络服务供应商)自动分配IP地址，给用户或者内部网络管理员作为对所有计算机作中央管理的手段。通常被应用在大型的局域网络环境中，主要作用是集中管理、分配IP地址，使网络环境中的主机动态的获得IP地址、Gateway地址、DNS服务器地址等信息，并能够提升地址的使用率。
DHCP协议采用客户端/服务器模型，主机地址的动态分配任务由网络主机(Client)驱动。当DHCP服务器接收到来自网络主机申请地址的信息时，才会向网络主机发送相关的地址配置等信息，以实现网络主机地址信息的动态配置。DHCP有3个端口，其中UDP 67(DHCPServer)和UDP 68(DHCPClient)为正常的DHCP服务端口；546号端口用于DHCPv6 Client，而不用于DHCPv4，是为DHCP failover服务，这是需要特别开启的服务，DHCP failover是用来做“双机热备”的。

DHCP Relay

DHCP Relay(DHCPR)：DHCP中继服务，也叫做DHCP中继代理可以实现在不同子网和物理网段之间处理和转发dhcp信息的功能。如果DHCP客户机与DHCP服务器在同一个物理网段，则客户机可以正确地获得动态分配的ip地址。如果不在同一个物理网段，则需要DHCP Relay Agent(中继代理)。用DHCP Relay代理可以去掉在每个物理的网段都要有DHCP服务器的必要,它可以传递消息到不在同一个物理子网的DHCP服务器，也可以将服务器的消息传回给不在同一个物理子网的DHCP客户机。

Setup DHCPServer

Software: dhcp.x86.64
ServiceName: dhcpd
step1. Install dhcp

yum install -y dhcpd
  

 

  
1
 

step2. Service config file (DHCPServer use static IP)

cp /usr/share/doc/dhcp-4.1.1/dhcp.conf.sample /etc/dhcp/dhcpd.conf
  

 

  
1
 

vim /etc/dhcp/dhcpd.conf

#one networkSegment one subnet
subnet subnetIPsegment netmask subnetNetmask{ range addressPool option domain-name-servers DNS1,DNS2 option domain-name "domain.org" #default domain option routes routesIP default-lease-time leaseTime max-lease-time leaseTime
}
  

 

  
1
  
2
  
3
  
4
  
5
  
6
  
7
  
8
  
9
 

step3. Start DHCP server

service dhcpd start
netstat -lpntu | grep :67  #Ensure the DHCP service start successfully
  

 

  
1
  
2
 

Setup ClientPort

We can check the leaseFile，URL: /var/lib/dhcpd/dhcpd.leases
可以在dhcpd.conf中设定，当client使用同一个IP到了租约的50%的时候，会再次的向DHCPServer发出请求要求续租，若此时DHCPServer关闭，ClientPort会有80%的时候再次发出请求要求续约。若达到了100%时间还没有得到DHCPServer的续约回应，则Client会再次的广播要求获取新的IP地址。如果网段中没有DHCPServer，HOST会为自己分配IP 169.254.0.0。

DHCP+DHCPRelay

Generally DHCPrelay and DHCP will bond in one server.Realize one DHCPServer satisfy more IP request of different networkSegment.DHCPRelayServer will receive the IP request of different networkSegment then give it to DHCP server deal with.
service:dchrelay

Setup DHCPRelay service

step1. We need three networkCard and delete VMware own dhcp service. And set the static ip for networkCard.
step2. Open system forward function.
vim /etc/sysctl.conf

net.ipv4.ip_forward = 1
  

 

  
1
 

Load sysctl configuration

sysctl -p
  

 

  
1
 

step3. Set relay interface and DHCPServer IP.
vim /etc.sysconfig/dhcrelay

INTERFACES="eth0 eth1 eth2"  #Relay interfacee
DHCPSERVERS="DHCPServerIP"
  

 

  
1
  
2
 

step4. Start dhcprelay service

service dhcrelay start
  

 

  
1
 

step5. Add three subnetSetting in the DHCPServer config file with /etc/dhcp/dhcpd.conf and restart service of dhcpd.
step6. Setup the static route rules in the DHCPServer.
Because the DHCPServer’s gatewayIP need assign to the internel gateway, so the DHCPRelayServer have to assign the route rules that the different subnetSegment computer can find the DHCPServer subnet interface.
For example:

route add -net subnet1SegmentPool gw DHCPServerSegmentInterfaceIP 
#subnet1SegmentPool eg: 192.168.2.0/24
route add -net subnet2SegmentPool gw DHCPServerSegmentInterfaceIP
route -n #check the route rules.
  

 

  
1
  
2
  
3
  
4
 

step7. Check the route relay

ping -C 1 otherSubnetSegmentIP
  

 

  
1
 

Attantion:General DHCPServer’s gateway assign to the internel GatewayServer, so need to set the static route rules that DHCPServer can send the response to DHCPServerSubnetSegmentInterface then other subnetSegment will give the DHCPServer’s response.

文章来源: is-cloud.blog.csdn.net，作者：范桂飓，版权归原作者所有，如需转载，请联系作者。

原文链接：is-cloud.blog.csdn.net/article/details/50173437