排序算法简介及其C实现
【摘要】
排序算法(Sorting Algorithm)是计算机算法的一个组成部分。 排序的目标是将一组数据 (即一个序列) 重新排列,排列后的数据符合从大到小 (或者从小到大) 的次序。这是古老但依然富有挑战的问题。Donald Knuth的经典之作《计算机程序设计艺术》(The Art of Computer Programming)的第三卷就专门用于讨论排序和查找。从无序...
排序算法(Sorting Algorithm)是计算机算法的一个组成部分。 排序的目标是将一组数据 (即一个序列) 重新排列,排列后的数据符合从大到小 (或者从小到大) 的次序。这是古老但依然富有挑战的问题。Donald Knuth的经典之作《计算机程序设计艺术》(The Art of Computer Programming)的第三卷就专门用于讨论排序和查找。从无序到有序,有效的减小了系统的熵值,增加了系统的有序度。对于一个未知系统来说,有序是非常有用的先验知识。因此,排序算法很多时候构成了其他快速算法的基础,比如二分法就是基于有序序列的查找算法。直到今天,排序算法依然是计算机科学积极探索的一个方向。 我在这里列出一些最常见的排序方法,并尝试使用C语言实现它们。一组数据存储为一个数组a,数组有n个元素。a[i]为数组中的一个元素,i为元素在数组中的位置 (index)。根据C的规定,数组下标从0开始。假设数组从左向右排列,下标为0的元素位于数组的最左边。
序列将最终排列成从小到大的顺序。下面函数中的参数ac是数组中元素的数目,也就是n。
(C语言的数组名都转成指针,传递给函数,所以需要传递数组中元素的数目ac给函数,详细见"Expert C Programming: Deep C Secrets"一书)
下面的链接中,有相关算法的动画图例,强烈推荐同时阅读。
http://www.sorting-algorithms.com/ 冒泡排序 (Bubble Sort)
对于一个已经排序好的序列,它的任意两个相邻元素,都应该满足a[i-1] <= a[i]的关系。冒泡排序相当暴力的实现了这一目标:不断扫描相邻元素,看它们是否违章。一旦违章,立即纠正。在冒泡排序时,计算机从右向左遍历数组,比较相邻的两个元素。如果两个元素的顺序是错的,那么sorry,请两位互换。如果两个元素的顺序是正确的,则不做交换。经过一次遍历,我们可以保证最小的元素(泡泡)处于最左边的位置。
然而,经过这么一趟,冒泡排序不能保证所有的元素已经按照次序排列好。我们需要再次从右向左遍历数组元素,进行冒泡排序。这一次遍历,我们不用考虑最左端的元素,因为该元素已经是最小的。遍历结束后,继续重复扫描…… 总共可能进行n-1次的遍历。
如果某次遍历过程中,没有发生交换,bingo,这个数组已经排序好,可以中止排序。如果起始时,最大的元素位于最左边,那么冒泡算法必须经过n-1次遍历才能将数组排列好,而不能提前完成排序。
/*By Vamei*/
/*swap the neighbors if out of order*/
void bubble_sort(int a[], int ac)
{ /*use swap*/ int i,j; int sign; for (j = 0; j < ac-1; j++) { sign = 0; for(i = ac-1; i > j; i--) { if(a[i-1] > a[i]) { sign = 1; swap(a+i, a+i-1); } } if (sign == 0) break; }
} 插入排序 (Insertion Sort)
假设在新生报到的时候,我们将新生按照身高排好队(也就是排序)。如果这时有一名学生加入,我们将该名学生加入到队尾。如果这名学生比前面的学生低,那么就让该学生和前面的学生交换位置。这名学生最终会换到应在的位置。这就是插入排序的基本原理。
对于起始数组来说,我们认为最初,有一名学生,也就是最左边的元素(i=0),构成一个有序的队伍。
随后有第二个学生(i=1)加入队伍,第二名学生交换到应在的位置;随后第三个学生加入队伍,第三名学生交换到应在的位置…… 当n个学生都加入队伍时,我们的排序就完成了。
/*By Vamei*/
/*insert the next element into the sorted part*/
void insert_sort(int a[], int ac)
{ /*use swap*/ int i,j; for (j=1; j < ac; j++) { i = j-1; while((i>=0) && (a[i+1] < a[i])) { swap(a+i+1, a+i); i--; } }
}
选择排序 (Selection Sort)
排序的最终结果:任何一个元素都不大于位于它右边的元素 (a[i] <= a[j], if i <= j)。所以,在有序序列中,最小的元素排在最左的位置,第二小的元素排在i=1的位置…… 最大的元素排在最后。
选择排序是先找到起始数组中最小的元素,将它交换到i=0;然后寻找剩下元素中最小的元素,将它交换到i=1的位置…… 直到找到第二大的元素,将它交换到n-2的位置。这时,整个数组的排序完成。
/*By Vamei*/
/*find the smallest of the rest,
then append to the sorted part*/
void select_sort(int a[], int ac)
{ /*use swap*/ int i,j; int min_idx; for (j = 0; j < ac-1; j++) { min_idx = j; for (i = j+1; i < ac; i++) { if (a[i] < a[min_idx]) { min_idx = i; } } swap(a+j, a+min_idx); } } 希尔排序 (Shell Sort)
我们在冒泡排序中提到,最坏的情况发生在大的元素位于数组的起始。这些位于数组起始的大元素需要多次遍历,才能交换到队尾。这样的元素被称为乌龟(turtle)。
乌龟元素的原因在于,冒泡排序总是相邻的两个元素比较并交换。所以每次从右向左遍历,大元素只能向右移动一位。(小的元素位于队尾,被称为兔子(rabbit)元素,它们可以很快的交换到队首。)
希尔排序是以更大的间隔来比较和交换元素,这样,大的元素在交换的时候,可以向右移动不止一个位置,从而更快的移动乌龟元素。比如,可以将数组分为4个子数组(i=4k, i=4k+1, i=4k+2, i=4k+3),对每个子数组进行冒泡排序。比如子数组i=0,4,8,12...。此时,每次交换的间隔为4。
完成对四个子数组的排序后,数组的顺序并不一定能排列好。希尔排序会不断减小间隔,重新形成子数组,并对子数组冒泡排序…… 当间隔减小为1时,就相当于对整个数组进行了一次冒泡排序。随后,数组的顺序就排列好了。
希尔排序不止可以配合冒泡排序,还可以配合其他的排序方法完成。
/*By Vamei*/
/*quickly sort the turtles at the tail of the array*/
void shell_sort(int a[], int ac)
{ int step; int i,j; int nsub; int *sub; /* initialize step */ step = 1; while(step < ac) step = 3*step + 1; /* when step becomes 1, it's equivalent to the bubble sort*/ while(step > 1) { /* step will go down to 1 at most */ step = step/3 + 1; for(i=0; i<step; i++) { /* pick an element every step, and combine into a sub-array */ nsub = (ac - i - 1)/step + 1; sub = (int *) malloc(sizeof(int)*nsub); for(j=0; j<nsub; j++) { sub[j] = a[i+j*step]; } /* sort the sub-array by bubble sorting. It could be other sorting methods */ bubble_sort(sub, nsub); /* put back the sub-array*/ for(j=0; j<nsub; j++) { a[i+j*step] = sub[j]; } /* free sub-array */ free(sub); } }
}
Shell Sorting依赖于间隔(step)的选取。一个常见的选择是将本次间隔设置为上次间隔的1/1.3。见参考书籍。 归并排序 (Merge Sort)
如果我们要将一副扑克按照数字大小排序。此前已经有两个人分别将其中的一半排好顺序。那么我们可以将这两堆扑克向上放好,假设小的牌在上面。此时,我们将看到牌堆中最上的两张牌。
我们取两张牌中小的那张取出放在手中。两个牌堆中又是两张牌暴露在最上面,继续取小的那张放在手中…… 直到所有的牌都放入手中,那么整副牌就排好顺序了。这就是归并排序。 下面的实现中,使用递归:
/*By Vamei*/
/*recursively merge two sorted arrays*/
void merge_sort(int *a, int ac)
{ int i, j, k; int ac1, ac2; int *ah1, *ah2; int *container; /*base case*/ if (ac <= 1) return; /*split the array into two*/ ac1 = ac/2; ac2 = ac - ac1; ah1 = a + 0; ah2 = a + ac1; /*recursion*/ merge_sort(ah1, ac1); merge_sort(ah2, ac2); /*merge*/ i = 0; j = 0; k = 0; container = (int *) malloc(sizeof(int)*ac); while(i<ac1 && j<ac2) { if (ah1[i] <= ah2[j]) { container[k++] = ah1[i++]; } else { container[k++] = ah2[j++]; } } while (i < ac1) { container[k++] = ah1[i++]; } while (j < ac2) { container[k++] = ah2[j++]; } /*copy back the sorted array*/ for(i=0; i<ac; i++) { a[i] = container[i]; } /*free space*/ free(container);
} 快速排序 (Quick Sort)
我们依然考虑按照身高给学生排序。在快速排序中,我们随便挑出一个学生,以该学生的身高为参考(pivot)。然后让比该学生低的站在该学生的右边,剩下的站在该学生的左边。
很明显,所有的学生被分成了两组。该学生右边的学生的身高都大于该学生左边的学生的身高。
我们继续,在低身高学生组随便挑出一个学生,将低身高组的学生分为两组(很低和不那么低)。同样,将高学生组也分为两组(不那么高和很高)。
如此继续细分,直到分组中只有一个学生。当所有的分组中都只有一个学生时,则排序完成。 在下面的实现中,使用递归:
/*By Vamei*/
/*select pivot, put elements (<= pivot) to the left*/
void quick_sort(int a[], int ac)
{ /*use swap*/ /* pivot is a position, all the elements before pivot is smaller or equal to pvalue */ int pivot; /* the position of the element to be tested against pivot */ int sample; /* select a pvalue. Median is supposed to be a good choice, but that will itself take time. here, the pvalue is selected in a very simple wayi: a[ac/2] */ /* store pvalue at a[0] */ swap(a+0, a+ac/2); pivot = 1; /* test each element */ for (sample=1; sample<ac; sample++) { if (a[sample] < a[0]) { swap(a+pivot, a+sample); pivot++; } } /* swap an element (which <= pvalue) with a[0] */ swap(a+0,a+pivot-1); /* base case, if only two elements are in the array, the above pass has already sorted the array */ if (ac<=2) return; else { /* recursion */ quick_sort(a, pivot); quick_sort(a+pivot, ac-pivot); }
}
理想的pivot是采用分组元素中的中位数。然而寻找中位数的算法需要另行实现。也可以随机选取元素作为pivot,随机选取也需要另行实现。为了简便,我每次都采用中间位置的元素作为pivot。 堆排序 (Heap Sort)
堆(heap)是常见的数据结构。它是一个有优先级的队列。最常见的堆的实现是一个有限定操作的Complete Binary Tree。这个Complete Binary Tree保持堆的特性,也就是父节点(parent)大于子节点(children)。因此,堆的根节点是所有堆元素中最小的。堆定义有插入节点和删除根节点操作,这两个操作都保持堆的特性。
我们可以将无序数组构成一个堆,然后不断取出根节点,最终构成一个有序数组。
堆的更详细描述请阅读参考书目。 下面是堆的数据结构,以及插入节点和删除根节点操作。你可以很方便的构建堆,并取出根节点,构成有序数组。
/* By Vamei Use an big array to implement heap DECLARE: int heap[MAXSIZE] in calling function heap[0] : total nodes in the heap for a node i, its children are i*2 and i*2+1 (if exists) its parent is i/2 */
void insert(int new, int heap[])
{ int childIdx, parentIdx; heap[0] = heap[0] + 1; heap[heap[0]] = new; /* recover heap property */ percolate_up(heap);
}
static void percolate_up(int heap[]) { int lightIdx, parentIdx; lightIdx = heap[0]; parentIdx = lightIdx/2; /* lightIdx is root? && swap? */ while((parentIdx > 0) && (heap[lightIdx] < heap[parentIdx])) { /* swap */ swap(heap + lightIdx, heap + parentIdx); lightIdx = parentIdx; parentIdx = lightIdx/2; }
}
int delete_min(int heap[])
{ int min; if (heap[0] < 1) { /* delete element from an empty heap */ printf("Error: delete_min from an empty heap."); exit(1); } /* delete root move the last leaf to the root */ min = heap[1]; swap(heap + 1, heap + heap[0]); heap[0] -= 1; /* recover heap property */ percolate_down(heap); return min;
}
static void percolate_down(int heap[]) { int heavyIdx; int childIdx1, childIdx2, minIdx; int sign; /* state variable, 1: swap; 0: no swap */ heavyIdx = 1; do { sign = 0; childIdx1 = heavyIdx*2; childIdx2 = childIdx1 + 1; if (childIdx1 > heap[0]) { /* both children are null */ break; } else if (childIdx2 > heap[0]) { /* right children is null */ minIdx = childIdx1; } else { minIdx = (heap[childIdx1] < heap[childIdx2]) ? childIdx1 : childIdx2; } if (heap[heavyIdx] > heap[minIdx]) { /* swap with child */ swap(heap + heavyIdx, heap + minIdx); heavyIdx = minIdx; sign = 1; } } while(sign == 1);
}
总结
除了上面的算法,还有诸如Bucket Sorting, Radix Sorting涉及。我会在未来实现了相关算法之后,补充到这篇文章中。相关算法的时间复杂度分析可以参考书目中找到。我自己也做了粗糙的分析。如果博客园能支持数学公式的显示,我就把自己的分析过程贴出来,用于引玉。
上面的各个代码是我自己写的,只进行了很简单的测试。如果有错漏,先谢谢你的指正。
最后,上文中用到的交换函数为:
/* By Vamei */
/* exchange the values pointed by pa and pb*/
void swap(int *pa, int *pb)
{ int tmp; tmp = *pa; *pa = *pb; *pb = tmp;
}
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 61
- 62
- 63
- 64
- 65
- 66
- 67
- 68
- 69
- 70
- 71
- 72
- 73
- 74
- 75
- 76
- 77
- 78
- 79
- 80
- 81
- 82
- 83
- 84
- 85
- 86
- 87
- 88
- 89
- 90
- 91
- 92
- 93
- 94
- 95
- 96
- 97
- 98
- 99
- 100
- 101
- 102
- 103
- 104
- 105
- 106
- 107
- 108
- 109
- 110
- 111
- 112
- 113
- 114
- 115
- 116
- 117
- 118
- 119
- 120
- 121
- 122
- 123
- 124
- 125
- 126
- 127
- 128
- 129
- 130
- 131
- 132
- 133
- 134
- 135
- 136
- 137
- 138
- 139
- 140
- 141
- 142
- 143
- 144
- 145
- 146
- 147
- 148
- 149
- 150
- 151
- 152
- 153
- 154
- 155
- 156
- 157
- 158
- 159
- 160
- 161
- 162
- 163
- 164
- 165
- 166
- 167
- 168
- 169
- 170
- 171
- 172
- 173
- 174
- 175
- 176
- 177
- 178
- 179
- 180
- 181
- 182
- 183
- 184
- 185
- 186
- 187
- 188
- 189
- 190
- 191
- 192
- 193
- 194
- 195
- 196
- 197
- 198
- 199
- 200
- 201
- 202
- 203
- 204
- 205
- 206
- 207
- 208
- 209
- 210
- 211
- 212
- 213
- 214
- 215
- 216
- 217
- 218
- 219
- 220
- 221
- 222
- 223
- 224
- 225
- 226
- 227
- 228
- 229
- 230
- 231
- 232
- 233
- 234
- 235
- 236
- 237
- 238
- 239
- 240
- 241
- 242
- 243
- 244
- 245
- 246
- 247
- 248
- 249
- 250
- 251
- 252
- 253
- 254
- 255
- 256
- 257
- 258
- 259
- 260
- 261
- 262
- 263
- 264
- 265
- 266
- 267
- 268
- 269
- 270
- 271
- 272
- 273
- 274
- 275
- 276
- 277
- 278
- 279
- 280
- 281
- 282
- 283
- 284
- 285
- 286
- 287
- 288
- 289
- 290
- 291
- 292
- 293
- 294
- 295
- 296
- 297
- 298
- 299
- 300
- 301
- 302
- 303
- 304
- 305
- 306
- 307
- 308
- 309
- 310
- 311
- 312
- 313
- 314
- 315
- 316
- 317
- 318
- 319
- 320
- 321
- 322
- 323
- 324
- 325
- 326
- 327
- 328
- 329
- 330
- 331
- 332
- 333
- 334
- 335
- 336
- 337
- 338
- 339
- 340
- 341
- 342
- 343
- 344
- 345
- 346
- 347
- 348
- 349
- 350
- 351
- 352
- 353
- 354
- 355
- 356
- 357
- 358
- 359
- 360
- 361
- 362
- 363
- 364
- 365
- 366
- 367
- 368
- 369
- 370
- 371
- 372
- 373
- 374
- 375
- 376
- 377
- 378
- 379
- 380
- 381
- 382
- 383
- 384
- 385
- 386
- 387
- 388
- 389
- 390
- 391
- 392
- 393
- 394
- 395
- 396
- 397
- 398
- 399
- 400
- 401
作者:Vamei 出处:http://www.cnblogs.com/vamei
文章来源: chenhx.blog.csdn.net,作者:谙忆,版权归原作者所有,如需转载,请联系作者。
原文链接:chenhx.blog.csdn.net/article/details/48548689
【版权声明】本文为华为云社区用户转载文章,如果您发现本社区中有涉嫌抄袭的内容,欢迎发送邮件进行举报,并提供相关证据,一经查实,本社区将立刻删除涉嫌侵权内容,举报邮箱:
cloudbbs@huaweicloud.com
- 点赞
- 收藏
- 关注作者
评论(0)