Common IOT Commands on Cloud AP
【摘要】 1.Configuring the Card Connection Typecmds>Sys>Wlan>ap-id 0>card 1>card connect-type Ethernet 2. Query card information.>Sys>diagnose>display iot-card all 3. Reboot the card.>Sys>diagnose>iot-card ...
1.Configuring the Card Connection Type
cmds
>Sys
>Wlan
>ap-id 0
>card 1
>card connect-type Ethernet
2. Query card information.
>Sys
>diagnose
>display iot-card all
3. Reboot the card.
>Sys
>diagnose
>iot-card reboot card 1
FAQ:
1.When the AP is running properly, but the card is absent.
Check the current poe-power of AP. The AirEngine series APs can supply power to the card only when they are in AT or BT state.
【版权声明】本文为华为云社区用户原创内容，转载时必须标注文章的来源（华为云社区）、文章链接、文章作者等基本信息， 否则作者和本社区有权追究责任。如果您发现本社区中有涉嫌抄袭的内容，欢迎发送邮件进行举报，并提供相关证据，一经查实，本社区将立刻删除涉嫌侵权内容，举报邮箱：
cloudbbs@huaweicloud.com
- 点赞
- 收藏
- 关注作者
评论（0）