Xcode 调用OpenCV系统错误汇总

举报
malajisi 发表于 2019/10/16 00:00:33 2019/10/16
【摘要】 错误和异常Errors and exceptions(下面两条来自https://www.timpoulsen.com/2018/acquiring-images.html)1. As with reading still images, OpenCV does not offer proper exception handling when reading from a video sou...

错误和异常Errors and exceptions

(下面两条来自https://www.timpoulsen.com/2018/acquiring-images.html)

1. As with reading still images, OpenCV does not offer proper exception handling when reading from a video source. If you specify a source that doesn't exist, you'll get an error like the following

out device of bound (0-0): 1 opencv: camera failed to properly initialize!

(To create the preceding error, I used camera = cv2.VideoCapture(1) and since my laptop has just one camera, camera 1doesn't exist.)


2. It's important to release the video source properly when you're done by calling the release() method. Failing to do so can leave your camera unusable. Below is an example of the error you get attempting to use the built-in camera on a Mac that was not released properly before.

OpenCV: error in [AVCaptureDeviceInput initWithDevice:error:]OpenCV: Cannot Use FaceTime HD Camera (Built-in)OpenCV: camera failed to properly initialize!

If you end up in this state, you may have to restart your computer to recover. On the Mac, you can use the following command rather than restarting:

sudo killall VDCAssistant


3. Xcode中没有访问摄像头的权限,尽管在plist中加入了权限请求,依然可能不行。粗暴一点就是2的办法,另外一种办法,在termial中运行编译好的程序,然后赋予termial调用权限,访问正常,但是调试麻烦,可到Xcode attach到进程进行调试。

image.png

https://stackoverflow.com/questions/56084303/opencv-command-line-app-cant-access-camera-under-macos-mojave)


【版权声明】本文为华为云社区用户原创内容,转载时必须标注文章的来源(华为云社区)、文章链接、文章作者等基本信息, 否则作者和本社区有权追究责任。如果您发现本社区中有涉嫌抄袭的内容,欢迎发送邮件进行举报,并提供相关证据,一经查实,本社区将立刻删除涉嫌侵权内容,举报邮箱: cloudbbs@huaweicloud.com
  • 点赞
  • 收藏
  • 关注作者

评论(0

0/1000
抱歉,系统识别当前为高风险访问,暂不支持该操作

全部回复

上滑加载中

设置昵称

在此一键设置昵称,即可参与社区互动!

*长度不超过10个汉字或20个英文字符,设置后3个月内不可修改。

*长度不超过10个汉字或20个英文字符,设置后3个月内不可修改。

举报
请填写举报理由
0/200